Merchandise Description
Declutchable equipment override of ZHangZhoug Jimai Auto-Tech Co,.Ltd is a rotary handbook manage system employed to assistance the regular procedure of pneumatic actuator even the unexpected emergency predicament occurred. The gear override is employed to connect pneumatic actuators with rotary valves. It has the compact design and gentle fat. The special design enables it supply higher output torque by basically rotating the hand-wheel. JIMAI offers several optional size of equipment override to in shape various dimensions of valves and actuators. The common ISO 5211 Mounting pad makes it possible for it be put in immediately. It is primarily utilised to manually open up and close 90-degree angular journey valves.
No |
Areas Identify |
Substance |
1 |
Protect |
Aluminum Alloy |
2 |
Physique |
Aluminum Alloy |
3 |
Push Gear |
Ductile Iron |
four |
Gear Protect |
Aluminum Alloy |
5 |
Higher Male Square Stem |
Carbon Steel |
six |
Handwheel Shaft |
Carbon Metal with Chrome Plated |
7 |
Handwheel |
Plated Carbon Metal |
8 |
Place Lever Assy |
Plated Carbon Steel |
9 |
Situation Lock Assy |
Plated Carbon Metal |
ten |
Cover Bolts |
Carbon Metal with Zinc Plated |
11 |
Restrict Stops |
Stainless Metal |
twelve |
Equipment Cover Bolts |
Carbon Steel with Zinc Plated |
13 |
Shaft Bushings |
Carbon Metal |
fourteen |
Grease Fitting |
Brass |
15 |
Nameplate |
Aluminum |
16 |
O Rings |
NBR(Buna-N) |
Product | HO | H1 | B | K | Q | A | L | N | LO | D | D1 | D2 | d | G | H | P | I | J | Q | E |
JSD-1 | 101 | sixteen | fourteen | 14 | 19 | 90 | 185 | one hundred sixty | fifty three | 50 | six | eight | 70 | fifty | 57 | 70 | M6X12 | M6X12 | M8X12 | one hundred fifty five |
JSD-2 | 110 | 17 | 17 | seventeen | twenty five | 124 | 225 | two hundred | 74 | 70 | eight | ten | 102 | 70 | 70 | 102 | M8X13 | M8X13 | M10X16 | 200 |
JSD-three | 124 | 23 | 22 | 22 | 25 | a hundred and forty | 308 | 320 | 126 | 102 | ten | twelve | a hundred twenty five | 102 | 89 | one hundred twenty five | M10X16 | M12X20 | M12X20 | 400 |
JSD-4 | 185 | 25 | 27 | 27 | 29 | 185 | 400 | 450 | 186 | 125 | twelve | 14 | one hundred forty | 102 | 108 | one hundred forty | M10X16 | M12X20 | M16X25 | five hundred |
Product |
Equipment Ratio |
Output Torque (Nm) |
JSD-1 |
51:one |
three hundred |
JSD-two |
42:1 |
620 |
JSD-3 |
50:1 |
3200 |
JSD-four |
seventy nine:1 |
4500 |
Specializing
We are specializing in manufacturing pneumatic actuator, electric actuator, pneumatic actuated butterfly and ball valve, electrical actuated butterfly and ball valve, Minimal Change box and other Equipment………
Gain
one.Value: As we are the specialist manufacture in valve actuators and accessories, we guarantee that the cost offered should be very competitive compare with other people.
two. Raw content inspection: All material check higher high quality, and keep in warehouse.
3. Employees: All workers coaching 3 monthes, competent employees on production line.
Sample Order
We will cost categorical fee only for outdated clients in generally, and for new consumers we will charge fifty% of the units price and categorical price primarily. (It can be mentioned, we hold possibilities constantly.)
Shipping and delivery Time
We generally just take 20days for formal orders soon after obtained the prepayment, And Sample orders will be prepared inside of 7days.
Good quality Manage
We acquired very rigorous and full high quality system to ensure that each product will fulfill good quality needs as for every customers, incoming good quality management, ultimate high quality manage, out-heading high quality control. Meanwhile, all of the items will be strictly inspected before supply.”‘ High quality First, Services First” that we are pursuing All the time.
Warranty Period
eighteen months from the day we signed the agreement or PI. Complex assist for the total daily life.
Payment Terms And Conditions
one. TT Terms: The payment will be thirty% of prepayment by immediate financial institution remittance (T/T),remaining 70% prior to Shipment or the duplicate of BL send by us Through Fax or Electronic mail.
2. L/C Terms: Payment by L/C at sight and Unrestricted. (L/C must permit 30days least from the cargo day of presentation of documents for negotiation, all the clauses inside L/C need to be obvious, concise and suitable. Do not allow specific clauses, terms and circumstances.)
Aggressive Value
We give aggressive price, excellent quality and very best services to reach the CZPT goal.
Customization
Customized-produced is acceptable.
Application: | Motor, Pneumatic Actuator |
---|---|
Function: | Change Drive Torque, Manual Control |
Layout: | Three-Ring |
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Type: | Worm Gear Box |
###
Samples: |
US$ 40/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
No |
Parts Name |
Material |
1 |
Cover |
Aluminum Alloy |
2 |
Body |
Aluminum Alloy |
3 |
Drive Gear |
Ductile Iron |
4 |
Gear Cover |
Aluminum Alloy |
5 |
Upper Male Square Stem |
Carbon Steel |
6 |
Handwheel Shaft |
Carbon Steel with Chrome Plated |
7 |
Handwheel |
Plated Carbon Steel |
8 |
Position Lever Assy |
Plated Carbon Steel |
9 |
Position Lock Assy |
Plated Carbon Steel |
10 |
Cover Bolts |
Carbon Steel with Zinc Plated |
11 |
Limit Stops |
Stainless Steel |
12 |
Gear Cover Bolts |
Carbon Steel with Zinc Plated |
13 |
Shaft Bushings |
Carbon Steel |
14 |
Grease Fitting |
Brass |
15 |
Nameplate |
Aluminum |
16 |
O Rings |
NBR(Buna-N) |
###
MODEL | HO | H1 | B | K | Q | A | L | N | LO | D | D1 | D2 | d | G | H | P | I | J | Q | E |
JSD-1 | 101 | 16 | 14 | 14 | 19 | 90 | 185 | 160 | 53 | 50 | 6 | 8 | 70 | 50 | 57 | 70 | M6X12 | M6X12 | M8X12 | 155 |
JSD-2 | 110 | 17 | 17 | 17 | 25 | 124 | 225 | 200 | 74 | 70 | 8 | 10 | 102 | 70 | 70 | 102 | M8X13 | M8X13 | M10X16 | 200 |
JSD-3 | 124 | 23 | 22 | 22 | 25 | 140 | 308 | 320 | 126 | 102 | 10 | 12 | 125 | 102 | 89 | 125 | M10X16 | M12X20 | M12X20 | 400 |
JSD-4 | 185 | 25 | 27 | 27 | 29 | 185 | 400 | 450 | 186 | 125 | 12 | 14 | 140 | 102 | 108 | 140 | M10X16 | M12X20 | M16X25 | 500 |
###
Model |
Gear Ratio |
Output Torque (Nm) |
JSD-1 |
51:1 |
300 |
JSD-2 |
42:1 |
620 |
JSD-3 |
50:1 |
3200 |
JSD-4 |
79:1 |
4500 |
Application: | Motor, Pneumatic Actuator |
---|---|
Function: | Change Drive Torque, Manual Control |
Layout: | Three-Ring |
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Type: | Worm Gear Box |
###
Samples: |
US$ 40/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
No |
Parts Name |
Material |
1 |
Cover |
Aluminum Alloy |
2 |
Body |
Aluminum Alloy |
3 |
Drive Gear |
Ductile Iron |
4 |
Gear Cover |
Aluminum Alloy |
5 |
Upper Male Square Stem |
Carbon Steel |
6 |
Handwheel Shaft |
Carbon Steel with Chrome Plated |
7 |
Handwheel |
Plated Carbon Steel |
8 |
Position Lever Assy |
Plated Carbon Steel |
9 |
Position Lock Assy |
Plated Carbon Steel |
10 |
Cover Bolts |
Carbon Steel with Zinc Plated |
11 |
Limit Stops |
Stainless Steel |
12 |
Gear Cover Bolts |
Carbon Steel with Zinc Plated |
13 |
Shaft Bushings |
Carbon Steel |
14 |
Grease Fitting |
Brass |
15 |
Nameplate |
Aluminum |
16 |
O Rings |
NBR(Buna-N) |
###
MODEL | HO | H1 | B | K | Q | A | L | N | LO | D | D1 | D2 | d | G | H | P | I | J | Q | E |
JSD-1 | 101 | 16 | 14 | 14 | 19 | 90 | 185 | 160 | 53 | 50 | 6 | 8 | 70 | 50 | 57 | 70 | M6X12 | M6X12 | M8X12 | 155 |
JSD-2 | 110 | 17 | 17 | 17 | 25 | 124 | 225 | 200 | 74 | 70 | 8 | 10 | 102 | 70 | 70 | 102 | M8X13 | M8X13 | M10X16 | 200 |
JSD-3 | 124 | 23 | 22 | 22 | 25 | 140 | 308 | 320 | 126 | 102 | 10 | 12 | 125 | 102 | 89 | 125 | M10X16 | M12X20 | M12X20 | 400 |
JSD-4 | 185 | 25 | 27 | 27 | 29 | 185 | 400 | 450 | 186 | 125 | 12 | 14 | 140 | 102 | 108 | 140 | M10X16 | M12X20 | M16X25 | 500 |
###
Model |
Gear Ratio |
Output Torque (Nm) |
JSD-1 |
51:1 |
300 |
JSD-2 |
42:1 |
620 |
JSD-3 |
50:1 |
3200 |
JSD-4 |
79:1 |
4500 |
Advantages and disadvantages of worm gear reducer gearbox
If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
Hollow shaft worm gear reducer gearbox
Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.
Multi-head worm gear reducer gearbox
The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
Hypoid Gear Set
Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.
Hypoid gear motor
A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.
R series worm gear reducer gearbox
R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
AGKNX Electric Worm Gear reducer gearbox
AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
editor by czh 2023-01-13